Self Adhesive Bitumen Waterproofing Flash Band

a. instant waterproof seal, even in famp conditions. 
b. quick and easy to apply, no specialist tools required.
c. 4 layers or protection: lacquer foil, membrane and bitumen adhesive
d. superior temperature resistance from -20ºC to +100ºC   -easily moulds to contours. 
e. long lasting protection, at least 15 years
f. available in a wide range of sizes. 
Storage Life: 12 months stored between 5 ºC and 25ºC in original containers1. Cut flashing to the required length;
2. remove the release film and press down the adhesive bitumen to the previously prepared surface.
3. Ensure full contact by smoothing down with a cloth, taking care to eliminate air bubbles.
4. Final rolling down of the edges with a wallpaper roller will ensure a good edge seal.
5. All overlaps should be a minimum of 25mm and well rolled down.
Note: In cold weather adhesion will be imporved by storing the roll in a  warm room for 12 hours or more before use, or by gently warming the strip during application.Do not apply below 5 ºC. Storage and Transportation
1) Different type and specification should be stacked separately;
2) Avoid sun-scorched and rain-drenched, Be ventilation;
3) The storage temperature should below 50°C;
4) It have to be one storey when keep in storage stand on end, and shouldn't be more than two storeys when transporting;
5) Avoid tilting or lateral drift, Covered with tarpaulin if need;
6) Base on the normal storage and transportation, the storage period is one year from the date of production.